Build it Right. Build it with Sleeve-It®
Sleeve-It® SD-1 is a pre-engineered fence post anchoring solution for enhancing below-grade foundational stability in fences placed on top of a segmental retaining wall (SRW). Because of its cantilevered form and other properties, using Sleeve-It during the SRW build permits a code-compliant fence to be constructed eliminating the 36” offset requirements of IBC 1015.2.
How Sleeve-It Works
The face of a Segmental Retaining Wall consists of dry stacked, mortarless concrete units. These units cannot resist an overturning moment generated when a load is applied to a fence post. The Sleeve-It System uses a traditional cantilever design to engage the overlying soil mass, thereby providing resistance to the fence load.
Weight (lbs) |
Height (inches) |
Width (inches) |
Depth (inches) |
Units per pkg. |
Units per pallet |
||
|---|---|---|---|---|---|---|---|
| Weight (lbs) | Height (inches) | Width (inches) | Depth (inches) | Units per pkg. | Units per pallet | ||
| Sleeve-It® Fence Post Anchoring | 7 | 23.4 | 15.3 | 30.6 | 5 | 45 |
For additional information visit: https://www.geogrid.com/en-us/products/sleeve-it-system
Simple Construction:
- Install the cantilevered Sleeve-It units near the elevation of the top of the wall
- Fill and compact soil to the top of the sleeve
- Leave the disposable lid on the sleeve until the fence installer places the fence post in the sleeve and fills with concrete
- The fencing contractor finished the fence, supported by the buried Sleeve-It System
