Sealers

Home »
»
»

    Sealers, Enhancers & Water repellents from:

    • BP Pro ~

    • SEK Surebond ~

    • Techniseal ~ 

    • Unicare for Natural Stone

     
     
     
    SIZE
    QTY PER CASE
    COVERAGE (APPROX)
    DESCRIPTION
     
      SIZE QTY PER CASE COVERAGE (APPROX) DESCRIPTION  
    BP PRO SEALERS
    ~ ESS Enhanced Joint Stabilizing Sealer 1, 5 or 55 gallon 4 - 1 gallon 80-100 sf per gallon Designed for use on on block paving to stabilize joint sand and seal the paver surface.  It is a water-based, single-component polymer that penetrates into the pores and seals the surface with a semi-gloss finish.
    ~ Invisible Stain Blocker 1 or 5 gallon 4 - 1 gallon 150-250 sf per gallon Is designed specifically for use on block paving to provide an invisible stain resistant barrier. It is a water-based single component polymer that penetrates to give you an invisible natural finish.
    ~ WL Wet Look Solvent Based Sealer 1, 5 or 55 gallon 4 - 1 gallon 50-125 sf per gallon Coats and seals the pavers’ surface creating a wet look with a gloss finish creating a decorative and protective barrier.
    ~ WSS Wet Look Joint Stabilizing Sealer 1, 5 or 55 gallon 4 - 1 gallon 50-125 sf per gallon Coats and seals the pavers’ surface creating a wet look with a semi-gloss finish creating a protective barrier while simultaneously stabilizing the paver joint sand.
    SUREBOND SEALERS
    ~ 1300 Joint Stabilizing Sealer 1, 5, or 55 gallon 6 -1 gallons 100-150 sf per gallon Is a water-based, single component, acrylic co-polymer sealer and joint sand stabilizer. This product is breathable and will not trap naturally occurring efflorescence. 
    ~ 8700 Wet Look Joint Stabilizing Sealer 1 or 5 gallon 4 - 1 gallon 80-120 sf per gallon Is a 3 in 1 product, it enhances surface tone with semi-gloss finish, protects the substrate surface and stabilizes joint sand. SB-8700 is specially formulated with an anti-fungal designed to inhibit the growth of mold, moss and algae on the sealer film.
    TECHNISEAL SEALERS
    ~ Surefoot Anti Slip Grit  for 1 gal of sealer add 5 spoons Reduces the slipperiness of sealed pavers and slabs. Available in 2 separate formulas to mix well with either water or solvent based sealers.
    ~ WL4  Wet Look Water Repellent 1, 5, or 55 gallon 4 - 1 gallon 100-150 sf per gallon This high-solid gloss finish paver protector will protect and beautify hardscape installations and leave them with a sleek permanently wet look.
    ~ WL5 Wet Look Recoater Paver Protector 1 or 5 gallon 4 - 1 gallon 100 - 150 sf per gallon This solvent-based paver protector serves as both a sealer and joint stabilizer for hardscape installations using polymeric sand or traditional jointing aggregates
    ~ Slit-Foam Roller 9" X 3" sold individually For solvent-based paver protectors  Remains spongy for a uniform application.
    UNICARE SEALERS
    ~ Natural Stone NatColorEnhance Sealer 1 or 5 liter Will leave no sheen, shine or surface coating.  The product soaks into the stone so it remains natural in appearance.  It also provides stain protection and helps to reduce algae growth
    ~ Natural Stone NatMatte Sealer 1 or 5 liter Will leave no sheen, shine or surface coating.  The product soaks into the stone leaving the natural. It provides stain protection.

    For additional Techniseal information visit: https://techniseal.com/pro_en_us/all

    For additional Surebond information from SEK visit: https://sek.us.com/

    For additional Unicare information from Unilock visit: https://www.unicare-products.com/